How To Install Arlo Outdoor Camera

Y'all tin can mount your Arlo Essential wire-free camera on a wall or ceiling. Before y'all mount your camera, make sure you've found a skilful location for signal forcefulness and motion detection. For more information, visit How should I position my Arlo Essential camera?.

Note: Yous must follow the instructions in the Arlo app when you commencement install your Essential wire-free photographic camera. Practise not brainstorm mounting your photographic camera before the Arlo app instructs you to during the installation process.

You need the following items to mount your Arlo Essential wire-free photographic camera:

A power drill with a 15/64 inch (6mm) drill bit
A Phillips-head screwdriver
The screw mount that came in the bundle with your camera
A pencil (optional)

Notation: We recommend using wall anchors when mounting on drywall, brick, or tile. For assist mounting your camera with wall anchors, visit How do I utilise the wall anchors that came with my Arlo camera?.

To mount your Arlo Essential wire-free camera:

Place the screw mount on the wall or ceiling where y'all plan to mount your camera.
On the wall or ceiling, marker the location of the three holes from the mountain.
Notation: The marks can exist used as a guide to drill pilot holes.
Remove the screw mount from the wall.
Utilise a 15/64 inch (6mm) drill bit to drill 3 holes into the wall.
Place the screw mount back onto the wall, and marshal it with the 3 holes in the wall.
While belongings the wall plate over the three holes, use a Phillips-head screw driver to spike a screw into each hole.
Note: If y'all want to mount your camera with wall anchors, visit How do I utilize the wall anchors that came with my Arlo camera?.
Spiral your Essential wire-free camera clockwise into the screw mountain.
Tilt and hinge to adjust the angle of the camera.
Twist the thumb screw and the grip clockwise to tighten the camera position.